Asbestos Spray Coating Removal

Sprayed asbestos coatings are licensable work. Pro Asbestos Removal does not hold an HSE asbestos-removal licence and does not undertake sprayed-coating removal directly. Use adequate asbestos information to confirm the material before disturbing a suspect coating.

Appearance alone cannot identify sprayed asbestos

Confirmed sprayed-asbestos removal requires an HSE-licensed contractor

Survey, laboratory, analyst and licensed-contractor roles are job-specific

This page routes suspected sprayed asbestos to assessment and the licensed-contractor pathway. It does not present licensable removal as an in-house service.

Use adequate records or the appropriate survey/sampling route before disturbance.

Do not scrape, drill, cut or clean suspect sprayed material to identify it.

Confirmed sprayed-asbestos removal requires an HSE-licensed contractor.

Pro Asbestos Removal does not quote sprayed-coating removal as its own service.

Notification, analyst, clearance and waste records depend on the licensed project's actual requirements.

Use adequate asbestos information before intrusive work exposes or disturbs a suspect sprayed coating.

Check concealed surfaces and make sure the asbestos information covers the affected area before strip-out or intrusive work.

Use the appropriate demolition-survey route where existing information is not adequate for the work.

Avoid further disturbance or uncontrolled cleanup and arrange competent assessment.

Before exposing hidden structure, confirm whether suspect coatings are present and how the work is classified.

Use reliable records or a suitable survey route to establish what is known; do not infer sprayed asbestos from age alone.

Do not drill, cut or abrade suspect coatings until the material and work route have been established.

We do not hold an HSE asbestos-removal licence and do not undertake sprayed-asbestos removal directly.

Use adequate asbestos information and competent sampling/survey providers where the material is not already confirmed.

The HSE-licensed contractor and any independent analyst are confirmed for the individual licensable project.

• Pro Asbestos Removal carries out non-licensed and notifiable non-licensed asbestos work only.
• Work classified as licensable must be carried out by an HSE-licensed contractor.
• Whether asbestos work is licensed, notifiable non-licensed or non-licensed depends on the task, the asbestos-containing material and its condition.
• Confirm the material through adequate existing records or an appropriate survey route before considering licensed work.
• Customers receive the legally required documentation applicable to the work carried out and any asbestos-waste movement.

Sprayed coatings were used in some older buildings for fire protection, insulation or acoustic treatment. Appearance and location alone cannot confirm asbestos. Where confirmation is needed, use an appropriate survey/sampling route; confirmed sprayed asbestos removal uses an HSE-licensed contractor.

Sprayed asbestos coatings were used as fire protection on structural steel and other surfaces in some older buildings. Appearance alone cannot confirm asbestos, but confirmed sprayed asbestos coating work requires an HSE-licensed contractor.

Typical locations: Structural steel, soffits and other fire-protection applications in some older buildings

Sprayed coatings were also used for insulation or acoustic treatment. Suspect material should not be sampled, scraped or disturbed casually; use an appropriate survey/sampling route and the HSE-licensed-contractor route for confirmed sprayed asbestos work.

Typical locations: Ceilings, plant areas, service spaces and other older applications

Sprayed material may be hidden behind finishes or services. Before refurbishment or demolition exposes concealed surfaces, make sure the asbestos information is adequate for the affected area.

Typical locations: Behind ceilings, cladding and service installations

Before refurbishment exposes structural surfaces or service spaces, ensure the asbestos information is adequate for the affected area. Confirmed sprayed asbestos work requires an HSE-licensed contractor.

Older public buildings can contain several asbestos material types. Do not infer sprayed asbestos from building type alone; use reliable records or the appropriate survey route before intrusive work.

Plan assessment and any asbestos work around the actual material, access and occupancy constraints. Licensable sprayed-coating work is outside our direct service scope.

Older industrial buildings may contain sprayed fire-protection or insulation materials. Confirm the material and work category before maintenance, refurbishment or demolition.

Avoid further disturbance or uncontrolled cleanup. Isolate the immediate area where practicable and arrange competent assessment before anyone works on or near the material.

Before demolition, asbestos information must be adequate for the areas and materials that will be disturbed. Confirmed sprayed asbestos removal requires an HSE-licensed contractor.

Confirm the material through adequate existing records or an appropriate survey route before considering licensed work.

Whether asbestos work is licensed, notifiable non-licensed or non-licensed depends on the task, the asbestos-containing material and its condition.

Work classified as licensable must be carried out by an HSE-licensed contractor.

Pro Asbestos Removal carries out non-licensed and notifiable non-licensed asbestos work only.

Customers receive the legally required documentation applicable to the work carried out and any asbestos-waste movement.

Where licensed removal requires four-stage clearance, an independent analyst carries out the clearance process and issues the Certificate for Reoccupation.

Work on confirmed sprayed asbestos coatings requires an HSE-licensed contractor. The licensed contractor is responsible for the applicable notification, medical-surveillance and work-planning requirements. Pro Asbestos Removal does not undertake that work directly.

Work on confirmed sprayed asbestos coatings requires an HSE-licensed contractor. Pro Asbestos Removal does not offer that removal directly. Before intrusive work, make sure the asbestos information is adequate for the affected area.

Where the licensed job requires four-stage clearance, the licensed contractor and independent analyst arrange the handback process for that project. Provider and accreditation details must be verified for the individual instruction.

A competent assessment should determine whether the coating can remain managed in place or requires remedial work. Condition, location and planned disturbance matter. Do not assume removal is always necessary or that encapsulation is suitable without assessment. Work on confirmed sprayed asbestos coatings requires an HSE-licensed contractor.

Asbestos Removal Services

HSE asbestos guidance